| Input Voltage: | 90-260V, 50-60 Hz | 
    
      | Led Source: | 19x40W OSRAM RGBW 4-in-1 Quad-Color led
       Including a Round 2528 RGB Led Belt
 | 
    
      | Max Power : | 800W | 
    
      | Protocol: | USITT DMX-512 | 
    
      | Channels: | 22CH/26CH/36CH/43CH/78CH/119CH, 6 channel modes optional | 
    
      | Pan movement: | 540°(16bit fine) | 
    
      | Tilt movement: | 250°(16bit fine) | 
    
      | Advanced moving system: | Scan position memory, auto reposition after unexpected movement | 
    
      | fast, stable and quiet, auto X-Y repositioning | 
    
      | Zoom Angle: | 7°-45° | 
    
      | Strobe: | Variable from 1-25 flashes or random strobe | 
    
      | Control Mode | DMX512, master-slave and sound activated or auto operation | 
    
      | Dimming: | 0-100% Smooth linear LED dimmer | 
    
      | Controls: | LCD display with 4 touch buttons | 
    
      |  | LCD display switch-off automatically after 60 seconds | 
    
      | Cooling System | Lower noise and efficient waterproof FAN cooling system | 
    
      | Power Connectors: | Waterproof PowerCon™ compatible in/out power connectors | 
    
      | DMX Connectors: | Waterproof 3-pin DMX input/output (5-pin DMX is available) | 
    
      | Light Housing: | Pure aluminum casting waterproof housing | 
    
      | Use | Indoor IP65 for Outdoor stage, event, DJ shows, etc | 
    
      | More Function: | Each LED can be controlled individually. With unique honeycomb designed lens | 
    
      | The front lens can rotate without limitation in forward and reverse direction to create amazing effects | 
    
      | Display screen can be turned upside down with 180° to fit the installation in different place | 
    
      | Can be used as beam, wash or effect light use (Kaleido effects) | 
    
      | The scanning position can be memory, it will be automatically reset without expected movement after rotation | 
    
      | Fan cooling (fan speed changed depends on temperature variation). Temperature detecting system (If the temperature detected error, the light doesn't work to protect the fixture). |